Siemens SIMATIC ET 200SP Function Manual

OPC UA communication
9.5 Tips and recommendations
Communication
Function Manual, 11/2019, A5E03735815-AH
287
Creating a master copy from selection
You select multiple elements and create a single master copy from them that contains all
selected elements.
1. Copy to the clipboard the elements that you want to create as master copies.
2. Right-click on the "Master copies" folder or any of its subfolders in the library.
3. In the shortcut menu, select "Paste as a single master copy" command.
If multiple interfaces are added to a master copy from the OPC UA server or OPC UA client,
the label and the symbol in the library are changed accordingly.
A symbol with "+" is displayed instead of the simple symbol.
Figure 9-73 Create copy template in STEP 7
See also
Creating a user-defined server interface (Page 201)

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C