Siemens SIMATIC ET 200SP Function Manual

Routing
10.5 Virtual interface for IP-based applications
Communication
306 Function Manual, 11/2019, A5E03735815-AH
Settings in the communication module
The settings of the internal CP firewall do not have an effect on communication over the
virtual interface. This means the security functions of the communication module cannot
protect the data traffic via the virtual interface.
NOTICE
Connecting to non-secure networks
If you connect the CP to a non-secure network, it is absolutely necessary to connect an
additional firewall between the CP and the non-secure network. For example, use the
security modules SCALANCE S602 V3 and SCALANCE S623 with integrated firewall.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C