Siemens SIMATIC ET 200SP Function Manual

HMI communication
Communication
64 Function Manual, 11/2019, A5E03735815-AH
4. In the "Connections" tab, select the row of the HMI connection.
In the "General" area of the "Properties" tab, you see the properties of the HMI
connection, some of which you can change.
Figure 5-1 Setting up HMI communication
5. Download the hardware configuration to the CPU.
6. Download the hardware configuration to the HMI device.
Additional information
You can find information on S7 routing for HMI connections in the section S7 Routing
(Page 289).
You can find more information on setting up HMI connections in the STEP 7 online help.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C