Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC847E
52 Operating Instructions, 10/2018, A5E43920357-AA
● You have observed the information under "Country-specific information on supply voltage
(Page 49)".
1. Turn the on-off switch off (position "0"). Information on the position of the on/off switch is
available in "Operator controls (Page 23)".
2. Insert the power cable in the corresponding electrical socket. Information on the position
of the socket is available in "Power supply connections (Page 22)".
3. Insert the power cable in the electrical socket.
4. Switch the on/off switch to on (position | ).
Attach latch for power plug
To prevent unintentional removal of the power cable, you secure the plug as follows:
Remove the retaining screw
.
Screw on the latch for the power plug
②.
To Next Page
Loading...
Need help?
General
