Siemens SIMATIC IPC847E User Manual

Expanding and assigning parameters to the device
6.6 Drives
SIMATIC IPC847E
102 Operating Instructions, 10/2018, A5E43920357-AA
6.6.1.2
Permissible expansion for temperature range 0 to 50 °C
Note
Also read the information in
Mounting types (Page 47).
You can install the following drives in the Type A drive cage at various mounting locations.
You can find information on the mounting locations under:
● Drive cage type A (Page 17)
Installation options
The following representations give you an overview of the installation options for drives.
①
Drive in removable tray via
5.25" adapter
②
Drive in removable tray
③
Fan on drive cage type A. T
he
fan is only required when more
than two drives are installed.
④
Drive type "SATA" is possible
④
Drive type "SATA" is
possible
⑤
Additional drive mou
nt-
ed on the right side
panel on the drive bay
plate.
The maximum permitted power loss of the expansion cards is 80 W.
Ambient temperature
0 - 50 °C
Drive configuration
Mode
Non-RAID system
X
RAID1 system
X
RAID5 system
X
RAID1 system with hot spare drive
X
RAID5 system with hot spare drive
X

Siemens SIMATIC IPC847E Specifications

General

Brand	Siemens
Model	SIMATIC IPC847E
Category	Industrial PC
Language	English