Expanding and assigning parameters to the device
6.3 Memory modules
SIMATIC IPC847E
Operating Instructions, 10/2018, A5E43920357-AA
97
5. Evenly press on both sides of the memory module to avoid tilting until the two locks
audibly engage.
The memory module is inserted correctly if less than 1 mm of the gold contacts is visible
evenly across the entire length of the module.
6. Close the device.
Display of a changed memory configuration
A new memory configuration is detected automatically. The allocation of the "base memory
and extended memory" is automatically displayed when you switch on the device.
To Next Page
Loading...
Need help?
General
