Siemens SIMATIC S7 EIP-200S - Page 32

EIP-200S Ethernet/IP Adapter
2.6 Device profile: supported CIP objects
EIP-200S Ethernet/IP Adapter Distributed I/O System
32 System Manual, 06/2018, A5E44345053-AB
Instance attributes for TCP/IP Interface Object
Attribute
ID
Access
rule
Description
Data type
Default value
Semantics of values
1 Get Interface status
(Status)
DWORD 0x00000002 See table below: "Table for
Interface status, attribute
1"
2 Get Interface capa-
bility flags (Con-
figuration
Capability)
DWORD 0x00000015 Bit 0: BOOTP Client (false)
Bit 1: DNS Client (true)
Bit 2: DHCP Client (true)
Bit 3: DHCP-DNS Update
(false = device is not ca-
pable of sending its host
name in the DHCP re-
quest)
Bit 4: Configuration Setta-
ble (true = Interface control
flags are settable, see
attribute 3)
Bit 5-31: reserved
3 Set Interface control
flags (Configura-
tion Control)
DWORD 0x00000000 Bit 0-3: Startup Configura-
tion (0 – as stored in flash,
1 = via BOOTP, 2 = via
DHCP, 3-15 = reserved)
Bit 4: DNS Enable (false)
4 Get Path to physical
link object
STRUCT
of:
Identifies the object asso-
ciated with underlying
physical communication
object.
Size of path UINT 0x0002 Number of 16 bit words in
path.
Logical seg-
ments identifying
the physical link
Padded
EPATH
Class: = 0xF6
Instance = 1
Path address of the inter-
nal port of the embedded
switch.