2-22
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
TD 200 Configuration Wizard
Cancel
Finish
You have asked to configure 1 message(s). Define the message by placing the
highest priority message first. Press F1 for help with international characters.
< Prev
Embedded Data...
INS
<Previous Message Next Message >
VB32
V14.7
Message beginning address:
Message enabled bit:
Note: This field shows the
address of the particular
message. VB32 is the
address of MSG1.
TD200
Message 1 of 1
Figure 2-20 Wizard: Chinese Character Message
Confi
urin
the TD 200
To Next Page
Loading...
