Siemens SIMATIC TD 200 - Selecting the Baud Rate

3-19
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
Selecting the Baud Rate
The Setup Menu allows you to choose the baud rate for the TD 200. You can
choose either 9600 baud (9.6 Kbaud), 19.2 Kbaud, or 187.5 Kbaud. Use the
following procedure to enter the baud rate for the TD 200:
Key Action Display
1.
ESC
The TD 200 enters the Menu mode.
VIEW MESSAGES
MENU MODE:
2. The TD 200 scrolls down the menu
options five times.
TD 200 ADDRESS 1
SETUP MENU:
3. The TD 200 scrolls down the Setup
Menu to the baud rate option.
BAUD RATE 9.6K
SETUP MENU:
4.
ENTER
Press ENTER to move the cursor to the
baud rate field. Use the up or down
arrow keys to toggle between the baud
rates.
SETUP MENU:
BAUD RATE 19.2K
5.
ENTER
Press ENTER to store the new baud
rate.
SETUP MENU:
BAUD RATE 19.2K
Note
Pressing ESC at any time while you are setting the baud rate aborts the edit and
restores the previous baud rate.
Operatin
g
the TD 200