A-3
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
A.2 Approvals for USA, Canada and Australia
The characters stamped on a device are indicative of the requirements which that
device meets:
Underwriters Laboratories (UL) to the UL 1950 standard, Report E11 5352
Underwriters Laboratories (UL) to the Canadian standard C22.2 No. 950
UL recognition mark
Canadian Standard Association (CSA) to standard C22.2 No. 950 or C22.2 No. 220,
.
.
.
.
,
Report LR 81690
FM approval to Factory Mutual Approval Standard Class Number 3611, Class I, Division 2,
Group A, B, C, D
Note for Australia
Our product fulfills the requirements for Norm AS/NZS 3548.
FM Approval Notes
FM approval, if present, is to Factory Mutual Approval Standard Class Number
3611, Class I, Division 2, Group A, B, C, D.
Temperature class T5 is adhered to when the ambient temperature during
operation does not exceed 60°C.
!
Warning
Personal injury or property damage can result.
In hazardous areas, personal injury or property damage can result if you close or
disconnect an electrical circuit during operation (e.g. plug-in connections, fuses,
switches).
Do not close or disconnect any live circuits unless explosion hazards can be
definitely excluded.
!
Warning
WARNING - DO NOT DISCONNECT WHILE CIRCUIT IS LIVE
UNLESS LOCATION IS KNOWN TO BE NON-HAZARDOUS
C
FM
APPROVED
Specifications and Reference
To Next Page
Loading...
Need help?
General
