Hardware description
2.2 Interface description
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6
13
2.2.2 Interface (X1): External power supply
Connection
3-pin connector MSTB 2.5/3-ST-5.08 by Phoenix
Pin assignment
Table 2- 2 Pin assignment: External power supply (X1)
Pin Designation Type
1)
Function
1 P24EXT1 VI External supply for module (+24 V)
2 M24EXT1 VI Reference for external supply
3 PE VI Protective conductor of the external supply
1)
VI: Voltage input
Connection cables
The required connecting cables must be provided by the user:
Wire, conductor cross section: 1.0 - 1.5 mm
2
(AWG17 - AWG16)
Supply voltage
The specifications of the supply voltage can be found in Section "Power supply (Page 28)".
To Next Page
Loading...
