Siemens SIMOTION ADI4 User Manual

Parameter assignment
3.4 PROFIBUS parameters
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
42 Manual, 05/2009, 6FC5 297-0BA01-0BP6
3.4.5 Consistency
Consistency setting
The default setting for I/O data consistency is "Total length".
The "Total length" consistency setting means that direct access from the PLC user program
(e.g. byte, word, or double word) to this address area of the PLC operating system is not
permitted.

Siemens SIMOTION ADI4 Specifications

General

Brand	Siemens
Model	SIMOTION ADI4
Category	Recording Equipment
Language	English