Setting functions
8.9 Safe Torque Off (STO) safety function
Converter with control units CU250D-2
252 Operating Instructions, 04/2014, FW V4.7, A5E34261542B AA
The STARTER provides you with a number of documents to be regarded as a
recommendation for the acceptance tests of the safety functions.
Proceed as follows to create the acceptance documentation for the drive using STARTER:
1. In STARTER, select "Create acceptance documentation":
STARTER has templates in German and English.
2. Select the suitable template and create a report for each drive of your machine or system:
– Template for the machine documentation:
de_G120x_Dokumentation_Maschine: German template.
en_G120x_Documentation_machine: English template.
– Report of the settings for the basic functions, from firmware version V4.4 onwards:
de_G120x_Basicc_V4.4…: German report.
en_G120x_Basic_V4.4…: English report.
To Next Page
Loading...
