Supported functions
4.2 SINAMICS G130
Safety Integrated
54 Function Manual, 05/2010, A5E03264275A
4.2 SINAMICS G130
4.2.1 Basic functions
Preconditions
The Safety Integrated Basic Functions are part of the standard scope of the drive and can be
used without an additional license.
Supported Safety Integrated Basic Functions
Safety Function Abbreviation
Safe Torque Off STO Yes
Safe Stop 1 SS1 Yes
Safe Brake Control SBC No
Activation possibilities
Activation STO SS1 SBC
Control unit & terminal (power unit) Yes Yes No
PROFIsafe & terminal (power unit) Yes Yes No
4.2.2 Extended Functions
Use of the Safety Integrated Extended Functions is not possible with SINAMICS G130.
To Next Page
Loading...
