Siemens SINAMICS S150 - Sinamics G150; Basic Functions; Extended Functions

Supported functions
4.3 SINAMICS G150
Safety Integrated
Function Manual, 05/2010, A5E03264275A
55
4.3 SINAMICS G150
4.3.1 Basic functions
Preconditions
The Safety Integrated Basic Functions are part of the standard scope of the drive and can be
used without an additional license.
Supported Safety Integrated Basic Functions
Safety Function Abbreviation
Safe Torque Off STO Yes
Safe Stop 1 SS1 Yes
Safe Brake Control SBC No
Activation possibilities
Activation STO SS1 SBC
With option K82: Terminal module for
activation of the safety functions "STO" &
"SS1"
Yes Yes No
Control unit & terminal (power unit) Yes Yes No
PROFIsafe & terminal (power unit) Yes Yes No
4.3.2 Extended Functions
Use of the Safety Integrated Extended Functions is not possible with SINAMICS G150.