SINUMERIK 802D sl Operating and Service Training Manual Page 1
C74
C74
Work offsets milling
C74
1 Brief description
Module objective:
Upon completion of this
module you will be able to set the zero offset on a milling machine.
Module description:
This module shows how to set the ze
ro offset on a milling machine, and he
lps you to understand i
ts
purpose.
Module content:
• Overview of the coordinate system
• Zero offset page in the control
• Setting the zero offset
Zero offset page in the
control
Setting the zero offset
Section 3
Section 4
Overview of the coordi-
nate system
Section 2
To Next Page
Loading...
