SINUMERIK 802D sl Operating and Service Training Manual Page 1
C59
C59
Working with CF cards
C59
1 Brief description
Module objective:
Upon completion of this
module you can copy and paste programs between the CF card and the
CNC controller.
Module description:
It is possible
to use a CF (Compact Flash) card in the controller as additional storage for part pro-
grams or for storing backups of the
machines commissioning data. This module describes the usage
of the card in the control.
Module content:
• Copying data to and from the card
Copying data to and
from the card
Section 2
To Next Page
Loading...
