Notes
SINUMERIK 802D sl Operating and Service Training Manual Page 3
C97
C97
Spindle speed S
Function
The spindle speed is programmed in r.p.m. under the address S,
provided that there is a controlled spindle on the machine.
Programming
S1000 M03 ; Spindle accelerates Clock—wise to
1000rpm
….
S500 ; speed change
Section 2
Miscellaneous codes
Path Velocity F.
Function
The path velocity is dete
rmined by the programmed F word. All axis
can be traversed simulta
neously.
Programming
G01 G94
X100 F500 ; feed rate = 500mm/min
G01 G95
X100 F0.1 S500 ; feed rate = 0.1mm/rev
————
—————————————————————————————
To Next Page
Loading...
