Siemens SINUMERIK 802D Training Manual

SINUMERIK 802D sl Operating and Service Training Manual Page 1
C69
C69
Power on and referencing
C69
1. Description
Module description:
Before you
can work with the machine, the control has to be switched on. Axis with incremental mea-
suring syste
ms have to be referenced, so that the
control knows where the axis are in the machine
coordinate system.
It is not ne
cessary to reference axis
which have an absolute
measuring system.
• Switch on the control
• Referencing the axis
Referencing the axis
Section 3
Switch on the control
Section 2
Module objective:
Upon completion of this
module you can switch on the machine and reference the axis.
M
odule content:

Siemens SINUMERIK 802D Specifications

General

Brand	Siemens
Model	SINUMERIK 802D
Category	Control Unit
Language	English