Notes
SINUMERIK 802D sl Operating and Service Training Manual Page 3
C82
C82
Section 3
Jog 1 INC
The followi
ng screen will be seen:
Active INC mode
is sh
own here
Use the axis
pushbutton for the required
axis, and direction to be
moved. When
pre
ssed the chosen axis will move
by 1 increme
nt per press.
Secondly
PRESS
button onc
e for 1 INC, Twice for 10 INC etc..
3.1 Jog 1 INC, 10 INC, 100 INC, 1000 INC
First put the control into JO
G mode.
PRESS
To Next Page
Loading...
