Siemens SINUMERIK 810D Operation & Programming Manual

11
Alarms and Messages 08.02
11.2 Alarms with ManualTurn
11
© Siemens AG, 2002. All rights reserved
11-176 SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
111 007
Error in line %1 %2
Explanation %1 = Line number
%2 = Description of error
Reaction Alarm display
NC start disable
Remedy Remove the error.
111 008
Spindle not synchronized
Explanation Spindle not synchronized
Reaction Alarm display
Remedy Allow spindle to turn for at least one revolution (M3, M4).
111 009
Insert new tool: T%1
Explanation T%1 = Tool number
Tool change program requests a new tool
Reaction Alarm display
NC Stop
Remedy Insert new tool
111 010
Teach In Cancellation: Log overflow
Explanation Teach in procedure canceled.
Reaction Alarm display
Teach in file closed.
Remedy The refresh rate must be increased by 100 to 200 ms in MD 9606:
$MM_CTM_SIMULATION_TIME_NEW_POS.
111 100
Wrong position programmed for spindle
Explanation A position outside the range 0 - 359.999 has been programmed for a
modulo axis.
Reaction Alarm display
Interface signals are set
Interpreter stop
NC start disable
Remedy Program position in the range 0 - 359.999.
Reset alarm with RESET key. Restart program.
111 105
No measuring system exists
Explanation SPCON, SPOS or SPOSA has been programmed. These functions
require at least one measuring system. According to MD: NUM_ENCS
the machine axis/spindle has no measuring system.
Reaction Alarm display
Interface signals are set
Interpreter stop
NC start disable
Remedy Add a measuring system.
Reset alarm with RESET key. Restart program.

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English