stem
2
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition 2-35
Example 1 Tool wear +0.1 (choice of mm or inches)
Starting position:
Open input field X using the edit key and enter value +0.1.
Result:
Example 2 Calculate diameter A
40
160
∅ 50
∅ 120
30
∅ Α
Open input field X with Edit key
Position cursor at the end of the input field
Delete old value with cursor
Enter this example: 2 * 30 + 50
Result:
To Next Page
Loading...
