Siemens SINUMERIK 840D

15
12.98 Tables
15.1 List of instructions
15

Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
15-505
SR Sparking-out retraction path for
synchronized action
Real,
without sign
s
SRA Sparking-out retraction path with input
axial for synchronized action
SRA[Y]=0.2 m
ST Sparking-out time for synchronized action Real,
without sign
s
STA Sparking out time axial for synchronized
action
m
START Start selected programs simultaneously in several
channels from current program
ineffective for the
local channel
STAT Position of articulated joints Integer s
STARTFIFO
1
Execute; fill preprocessing buffer in parallel m 4
STOPFIFO Stop processing; fill preprocessing buffer until
STARTFIFO, preprocessing buffer "full" or end of
program is detected
m4
STOPRE Stop preprocessing until all prepared blocks are
executed in main run.
STOPREOF
Stop preprocessing OFF
STRING Data type: String Max. 200
characters
STRLEN Define string length INT
SUBSTR Define index of character in input string Real String: Parameter
1, character:
Parameter 2
SUPA Suppression of current zero offset incl. programm.
offsets, handwheel
offsets (DRF),
external zero
offsets and
PRESET offset
s9
SYNFCT Evaluation of a polynomial as a function
of a condition in the motion-synchronous
action
VAR REAL
SYNR The variable is read synchronously, i.e. at
execution time (synchronous read)
SYNRW The variable is read and written
synchronously, i.e. at execution time
(synchronous read-write)
SYNW The variable is written synchronously, i.e.
at execution time (synchronous write)
T Call tool
(change only if so defined in machine
data; otherwise M6 command required)
1 ... 32 000 Call via T No.:
or via tool name:
E.g. T3 or T=3
E.g. T="DRILL"