11
Alarms and Messages 08.02
11.2 Alarms with ManualTurn
11
© Siemens AG, 2002. All rights reserved
11-174 SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
11.2 Alarms with ManualTurn
11.2.1 Overview of alarms
If an illegal status is recognized in ManualTurn an alarm is generated
and machining aborted.
The error text that is displayed together with the alarm number gives
more detailed information about the cause of the fault.
Overview of alarms
100000–100999 Basic system
101000–101999 Diagnosis
102000–102999 Services
103000–103999 Machine
104000–104999 Parameters
105000–105999 Programming
106000–106999 Reserved
107000–107999 OEM
110000–110999 Reserved
111000–112999 ManualTurn
120000–120999 Reserved
Danger
Carefully check the installation using the description of the alarm that
has been triggered. Eliminate the cause of the alarm and acknowledge
the alarm in the way described. Non-observance could result in dange
to the machine, workpiece, stored settings and, in certain circumstan-
ces, to your health.
If you are in CNC mode, refer to the following alarm descriptions:
Reference: /DA/ Diagnostics Guide
11.2.2 Selecting the alarm/message overview
Function
You can display and acknowledge alarms and messages.
Sequence of operations
The alarm/message overview displays all queued alarms and
messages, together with the numbers, date/time and a description.
You acknowledge the alarm/message with the "NC Reset" soft key.
To Next Page
Loading...
Need help?
General
