0
08.02 Preface
0
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition 0-9
Preface
Organization of
documentation
The SINUMERIK documentation is organized on 3 different levels:
• General Documentation
• User Documentation
• Manufacturer/Service Documentation
Reader group
This manual is intended for users (operators) of turning machines with
SINUMERIK 840D/810D.
Validity
The Operator Control/Programming Guide is valid for ManualTurn
SW 6.2 with
• SINUMERIK 810D (SW 6.3 and higher)
• SINUMERIK 840D (SW 6.3 and higher)
Hotline
Please address any questions to the following hotline:
A&D Technical Support
Phone: ++49-(0)180-5050-222
Fax: ++49-(0)180-5050-223
E-Mail: adsupport@siemens.com
If you have any questions (suggestions, corrections) concerning the
documentation, please fax or e-mail them to the following address:
Fax: ++49-(0)9131-98-2176
Fax form provided at the end of the document
E-mail: motioncontrol.docu@erlf.siemens.de
Internet address
http://www.ad.siemens.de/sinumerik
SINUMERIK 840D
powerline
From 09.2001 onwards, the SINUMERIK 840D powerline and
SINUMERIK 840DE powerline will be available with enhanced
performance. See the hardware description below for a list of the
available powerline modules:
References: /PHD/, Configuring Manual SINUMERIK 840D
SINUMERIK 810D
powerline
From 12.2001 onwards, the SINUMERIK 810D powerline and
SINUMERIK 810DE powerline will be available with enhanced
performance. See the hardware description below for a list of the
available powerline modules:
References: /PHC/, Configuring Manual SINUMERIK 810D
Standard scope
This Operating/Programming Guide describes only the functionality of
the ManualTurn user interface. A description of add-on features or
modifications made by the machine builder are not included in this
guide.
For more detailed information on SINUMERIK 840D/810D publications
and other publications covering all SINUMERIK controls (e.g. universal
interface, measuring cycles...), please contact your local Siemens
office.
To Next Page
Loading...
Need help?
General
