Siemens SINUMERIK 840D Operation & Programming Manual

A
Appendix 08.02
References
A
© Siemens AG, 2002. All rights reserved
A-218 SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
Manufacturer/Service Documentation
a) Lists
/LIS/
SINUMERIK 840D/840Di/810D
SIMODRIVE 611D
Lists (11.02 Edition)
Order No.: 6FC5 297-6AB70-0BP3
b) Hardware
/BH/
SINUMERIK 840D/840Di/810D
Operator Components Manual (Hardware) (11.02 Edition)
Order No: 6FC5 297-6AA50-0BP2
/BHA/ SIMODRIVE Sensor
Absolute Position Sensor with Profibus-DP
User's Guide (Hardware) (02.99 Edition)
Order No.: 6SN1 197-0AB10-0YP1
/EMV/
SINUMERIK, SIROTEC, SIMODRIVE
EMC Installation Guide (06.99 Edition)
Planning Guide (Hardware)
Order No.: 6FC5 297-0AD30-0BP1
/PHC/
SINUMERIK 810D
Configuring Manual (Hardware) (03.02 Edition)
Order No.: 6FC5 297-6AD10-0BP0
/PHD/
SINUMERIK 840D
Configuring Manual NCU 561.2-573.2 (Hardware) (10.02 Edition)
Order No.: 6FC5 297-6AC10-0BP2
/PMH/ SIMODRIVE Sensor
Measuring System for Main Spindle Drives
Configuring/Installation Guide, SIMAG-H (Hardware) (05.99 Edition)
Order No.: 6SN1197-0AB30-0BP0
c) Software
/FB1/
SINUMERIK 840D/840Di/810D/FM-NC
Description of Functions, Basic Machine (Part 1) (11.02 Edition)
(the various sections are listed below)
Order No.: 6FC5 297-6AC20-0BP2
A2 Various Interface Signals
A3 Axis Monitoring, Protection Zones
B1 Continuous Path Mode, Exact Stop and Look Ahead
B2 Acceleration

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB