Tool offsets
8.11 Smooth approach and retraction
Fundamentals
8-46 Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
N60 G248 G340 X70 Y0 Z20 DISCL =
6 DISR = 5 G40 F10000
;Retract (P
3ret
)
N70 X80 Y0 ;(P
0ret
)
N80 M30
Selecting the approach and retraction contour
The appropriate G command can be used
• to approach or retract with a straight line (G147, G148),
• a quadrant (G247, G248) or
• a semicircle (G347, G348).
To Next Page
Loading...
