Siemens SINUMERIK 840DE

Tables
12.4 List of predefined subprograms
Fundamentals
12-44 Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Group 59: Technology G groups
Name No. Meaning X m/n SAG MM
DYNNORM 1. Standard dynamic, as previously m Def.
DYNPOS 2. Positioning mode, tapping m
DYNROUGH 3. Roughing m
DYNSEMIFIN 4. Finishing m
DYNFINISH 5. Smooth-finishing m
12.4 List of predefined subprograms
12.4.1 Predefined subprogram calls
List of predefined subprograms
The list of predefined subprograms contains all available subprograms grouped according to
function.
Some control functions are activated with subprogram call syntax.
1. Coordinate system
Vocabulary
word/
function
identifier
1st parameter 2nd parameter 3rd-15th
parameter
4th-16th
parameter
Explanation
PRESETON AXIS*:
Axis identifier
Machine axis
REAL:
Preset offset
G700/G7100
context
3rd-15th
Parameter as
1 ...
4th-16th
parameter
as 2 ...
Sets the actual value for programmed
axes.
One axis identifier is programmed at a
time, with its respective value in the
next parameter.
Preset offsets can be programmed for
up to 8 axes with PRESETON.
DRFOF Deletes the DRF offset for all axes
assigned to the channel.
*) As a general rule, geometry or special axis identifiers can also be used instead of the
machine axis identifier, as long as the reference is unambiguous.