Siemens SINUMERIK 840DE

Tool offsets
8.13 2 ½ D tool offset (CUT2D, CUT2DF)
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
8-61
Tool radius too wide for inside machining
3URJUDPPHG
&RQWRXU
7RROSDWK
In such cases, the contours are machined only to the extent possible without damaging the
contour..
8.13 2 ½ D tool offset (CUT2D, CUT2DF)
Function
With CUT2D or CUT2DF you define how the tool radius compensation is to act or to be
interpreted when machining in inclined planes.
Tool length compensation
The tool length compensation generally always refers to the fixed, non-rotated working
plane.
Programming
CUT2D
Or
CUT2DF
Parameters
CUT2D Activate 2 1/2 D radius compensation (default)
CUT2DF Activate 2 1/2 D radius compensation, tool radius
compensation relative to the current frame or to inclined
planes