Tool offsets
8.12 Collision monitoring (CDON, CDOF, CDOF2)
Fundamentals
8-60 Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Bottleneck detection
3URJUDPPHGFRQWRXU
7RROSDWK
Since the tool radius selected is too wide to machine this inside contour, the "bottleneck" is
bypassed.
An alarm is output.
Contour path shorter than tool radius
3URJUDPPHGFRQWRXU
7RROSDWK
The tool travels round the workpiece corner on a transition circle and then continues to follow
the programmed contour exactly.
To Next Page
Loading...
