Positional Data
3.5 Special turning functions
Fundamentals
3-18 Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
=
;
'
:
'
0
/RQJLWXGLQDOD[LV
7UDQVYHUVHD[LV
Parameters
G54 to G599 or TRANS Call for the position of the workpiece zero
M Machine zero
W Tool zero point
Z axis Longitudinal axis
X axis Transverse axis
The two mutually perpendicular geometry axes are usually designated as follows:
• Longitudinal axis= Z axis (abscissa)
• Transverse axis= X axis (ordinate)
To Next Page
Loading...
