7.8 Setting the friction clutch
Introduction
It has a friction clutch and a switchable gear (Page 48) so that the positioner can be used with
different mechanical part-turn and linear actuators. Use the friction clutch to adjust the position
detection area. For positioners in non-flameproof enclosures, you also have the option of
locking the friction clutch.
Requirement
● The positioner is mounted.
Commissioning
7.8 Setting the friction clutch
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE 115
To Next Page
Loading...
