Siemens SIRIUS System Manual

SIRIUS System Manual
GWA 4NEB 430 0999-02b
xv
Ta b l e s
Table 1-1: Components and combinations with accessories . . . . . . . . . . . . . . . . . . . . . . 1-12
Table 1-2: Mounting methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Table 1-3: Mounting the device on the rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
Table 1-4: Removing the device from the rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
Table 1-5: How to use a Cage Clamp terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
Table 1-6: Connection cross-section for frame size S00 . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Table 1-7: Connection cross-section for frame size S0 . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Table 1-8: Connection cross-section for frame size S2 . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
Table 1-9: Connection cross-section for frame size S3 . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
Table 2-1: Circuit breakers, frame sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Table 2-2: Contact position indicators of the circuit breakers . . . . . . . . . . . . . . . . . . . . . . 2-9
Table 2-3: Testing overload tripping (example: frame size S00) . . . . . . . . . . . . . . . . . . . . 2-10
Table 2-4: Suggestions for switching direct current . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Table 2-5: Attachable accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Table 2-6: Voltage ranges of the auxiliary releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
Table 2-7: Testing overload tripping (example: frame size S0) . . . . . . . . . . . . . . . . . . . . . 2-21
Table 2-8: Alarm switch with tripped signal and short circuit signal . . . . . . . . . . . . . . . . . . 2-22
Table 2-9: Mounting the remote-control mechanism (frame size S2) . . . . . . . . . . . . . . . . 2-25
Table 2-10: Opening a cubicle door using the rotary switch extension . . . . . . . . . . . . . . . . 2-29
Table 2-11: Mounting the extension shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30
Table 2-12: Housings for circuit breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
Table 2-13: Front plates for any housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33
Table 2-14: Busbar systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
Table 2-15: Dimensions of the busbar adapters and accessories . . . . . . . . . . . . . . . . . . . . 2-37
Table 2-16: Link modules for connecting circuit breakers to contactors . . . . . . . . . . . . . . . . 2-38
Table 2-17: Rated operational voltage/current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41
Table 2-18: Types of 3-phase busbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41
Table 2-19: Conductor cross-section of the 3-phase feed-in terminals . . . . . . . . . . . . . . . . 2-42
Table 3-1: Utilization categories, test conditions for AC voltage . . . . . . . . . . . . . . . . . . . . 3-4
Table 3-2: Utilization categories, test conditions for DC voltages . . . . . . . . . . . . . . . . . . . 3-5
Table 3-3: Utilization categories, test conditions for AC voltage (auxiliary contact elements) . . 3-5
Table 3-4: Utilization categories, test conditions for DC voltage (auxiliary contact elements) . . 3-6
Table 3-5: Safe isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Table 3-6: Performance ranges of the 3RT10 contactors . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Table 3-7: Types of 3RT/3RH contactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Table 3-8: Actuating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12
Table 3-9: Mechanical endurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Table 3-10: Comparison between the 3RT1446 and 3RT1046 contactors . . . . . . . . . . . . . . 3-21
Table 3-11: Applications of 4-pole contactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Table 3-12: 4-pole contactors and auxiliary contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Table 3-13: 4-pole reversing contactor combination with front interlock (frame size S0) . . . . . . 3-23

Siemens SIRIUS Specifications

General

Product brand name	Siemens
Series	SIRIUS
Coil Voltage	24V DC, 110V AC, 230V AC
Switching Capacity	Up to 10A
Mounting Type	DIN rail
Product designation	SIRIUS
Contact Material	Silver alloy
Contact Rating	Varies depending on the specific SIRIUS relay model (e.g., 6 A at 250 V AC, 10 A at 250 V AC)
Switching Voltage	Varies depending on the specific SIRIUS relay model (e.g., 250 V AC, 400 V AC)
Mechanical Life	Up to 10 million operations
Electrical Life	Up to 100, 000 operations
Operating Temperature	-25°C to +55°C
Protection Class	IP20
Size of relay base	Varies depending on the specific SIRIUS relay model