EasyManuals Logo

Siemens SIRIUS System Manual

Siemens SIRIUS
425 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #326 background imageLoading...
Page #326 background image
3RH, 3TX, LZX coupling links
SIRIUS System Manual
6-6
GWA 4NEB 430 0999-02b
6.2.3 Plug-in relay coupling links
The Plug-in relay coupling links are modular coupling links. The plug-in for-
mat means the relays can be easily replaced.
Models
There are complete modules for 1 and 2 changeover contacts and individual
modules for 1, 2, 3 or 4 changeover contacts for a rated control supply volt-
age of either 24 VDC or 230 VAC.
Widths
Plug-in relay coupling links are available in 3 widths:
15.5 mm print relays, LZX: RT variants
27 mm mini-industrial relays, LZX: PT variants
38 mm industrial relays, LZX: MT variants
Installation
The plug-in relay coupling links are plugged into the associated bases, and
these are snapped onto a 35 mm rail in acc. with EN 50 022.
Surge suppression
To avoid high breaking voltage peaks, LZX: RT and PT plug-in relay coupling
links are available for a rated control supply voltage of 24 VDC, with 1, 2, or
4 changeover contacts (Ws) and integrated surge suppression (flywheeling
diode). RC elements are available for AC voltages.
Connection
The standard polarity must be taken into consideration when connecting up:
At A1: positive voltage supply (+)
At A2: negative voltage supply (-)
Test button
The LZX: PT and MT variants are equipped with a test button. The plug-in
relay coupling link can thus be brought into the switching state and locked
without the need for electrical triggering. When the test button is protrud-
ing, this indicates the locked switching position.
LED
An LED is available either as an individual plug-in module or is integrated in
the relay, depending on the variant involved.
Power consumption
Following on from the technical specifications of the electronic systems, the
coupling links have low power consumption.
Safe isolation
The drive circuit and contacts are electrically isolated. Safe isolation can also
be achieved for the print relays (LZX:RT series) by means of a special base.

Table of Contents

Other manuals for Siemens SIRIUS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIRIUS and is the answer not in the manual?

Siemens SIRIUS Specifications

General IconGeneral
Product brand nameSiemens
SeriesSIRIUS
Coil Voltage24V DC, 110V AC, 230V AC
Switching CapacityUp to 10A
Mounting TypeDIN rail
Product designationSIRIUS
Contact MaterialSilver alloy
Contact RatingVaries depending on the specific SIRIUS relay model (e.g., 6 A at 250 V AC, 10 A at 250 V AC)
Switching VoltageVaries depending on the specific SIRIUS relay model (e.g., 250 V AC, 400 V AC)
Mechanical LifeUp to 10 million operations
Electrical LifeUp to 100, 000 operations
Operating Temperature-25°C to +55°C
Protection ClassIP20
Size of relay baseVaries depending on the specific SIRIUS relay model

Related product manuals