Procedure
1. Open the SIPROM T Software directory > USB Driver.
2. Double-click the "CDM20830_Setup.exe" le.
3. Follow the installation instructions.
4. Open the "Device Manager" in Windows.
Figure 8-1 Windows Device Manager
5. Double-click "Ports (COM & LPT)".
The newly installed USB port is named "USB Serial Port (COMx)", where x stands for the COM
port number.
6. Note down the COM port number.
7. Open SIPROM T.
8. In the menu, select "Device" > "Settings".
9. Select the noted COM port number from the Windows "Device Manager".
10.Click "OK".
See also
Uninstalling USB drivers (Page 179)
Commissioning
8.16 Commissioning the USB modem and SIPROM T
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
130 Operating Instructions, 05/2020, A5E41864807-AB
To Next Page
Loading...
