Siemens SITRANS T Series - Connecting the SITRANS TF Dual Chamber Housing; Opening the Device; Connecting the SITRANS TF320 Dual Chamber Housing

6.8 Connecting the SITRANS TF dual chamber housing
6.8.1 Opening the device
Procedure


① Cover of the electrical cable compartment
② Safety catch (back)
Figure 6-6 Rear view of the device
1. Use a 3-mm Allen key to loosen the safety catch (rear) ② .
2. Unscrew the cover of the electrical cable compartment ①.
6.8.2 Connecting the SITRANS TF320 dual chamber housing
Requirement
The device is opened. (Page 95)
If you use stranded wire, you need a ferrule.
Note the maximum permissible core cross-section (Page 196).
Connecting
6.8 Connecting the SITRANS TF dual chamber housing
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB 95