Siemens SITRANS T Series - Mounting the SITRANS TF Single Chamber Housing; Mounting the Device on the Wall or Pipe; Rotating the Display

5.5 Mounting the SITRANS TF single chamber housing
5.5.1 Mounting the device on the wall or pipe
Procedure





,QVWDOODWLRQRQDZDOO
,QVWDOODWLRQRQDSLSH
① Fastening holes for fastening to a wall or to the pipe clamp
② Fastening holes for fastening the rail to the device
③ Pipe clamp
1. Use the 󹪝xing screws to fasten the bracket on the device.
2. Fasten the rail to the wall or to the pipe clamp.
5.5.2 Rotating the display
To read the display in any mounting position, you can rotate it by 360° in 90° steps.
Installing/mounting
5.5 Mounting the SITRANS TF single chamber housing
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB 69