4.4.4 Dual chamber housing design
① Cover over buttons ⑧ Cable inlet, optionally with cable gland
② Cover (front), optionally with inspection window ⑨ Cover (rear) for electrical terminal compartment
③ Local display (optional) ⑩ Electrical terminal compartment
Connecting the SITRANS TF dual chamber housing
(Page 95)
④ Safety catch (front) ⑪ Safety catch (back)
⑤ Retaining screw for rotation of the enclosure
Rotating the display (Page 72)
⑫ Ground terminal
⑥ Mounting holes on the enclosure ⑬ Nameplate
⑦ Nameplate ⑭ Screw for the cover over the buttons
Figure 4-20 Installation of SITRANS TF dual chamber housing
Description
4.4 SITRANS TF320/TF420
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
54 Operating Instructions, 05/2020, A5E41864807-AB
To Next Page
Loading...
