B.1.3 Updating the Electronic Device Description (EDD)
Procedure
The EDD revision must match the Firmware revision in the device according to the table in
section Product compatibility (Page 24). To install a new EDD:
1. Go to the support page Software downloads (
http://www.siemens.de/
prozessinstrumentierung/downloads).
Enter the product name in the eld "Enter search term...".
2. Download the most current EDD of your device.
3. Save les to your computer and extract the zipped le to an easily accessed location.
4. Launch SIMATIC PDM – Device Integration Manager. From the File menu, click "Read device
descriptions from compressed source...".
5. Browse to the unzipped EDD le, select and open it.
6. Use the "Integration" function to integrate the EDD into the device catalog. The EDD is now
accessible via SIMATIC Manager.
See also
Nameplate layout SITRANS TH (Page 36)
Remote operation
B.1 SIMATIC PDM
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
224 Operating Instructions, 05/2020, A5E41864807-AB
To Next Page
Loading...
