Siemens SITRANS T Series - Identification; User-Specific Type; Introduction

9.4.3 Identi󹪝cation
De󹪝ne the data that you need to identify your device under the "Identi󹪝cation" parameter group.
A distinction is made between data you can set yourself and values that are preset in the factory.
The default values are write-protected and cannot be changed by the user. The corresponding
allocation is set out below:
Designation Adjusta‐
ble
Preset Factory setting
Short tag X -
Long tag (TAG) X -
Description X -
Message X -
Installation date X - dd.mm.yyyy
Device
Manufacturer_id - X Siemens
Device type - X SITRANS TH320/TH420/TR320/TR420
Product name - X SITRANS TH320
1)
Serial number - X in accordance with device manufacture
Final assembly number - -
Hardware version - X in accordance with device manufacture
Firmware version - X in accordance with device manufacture
EDD version - X
1)
in accordance with the order
9.4.4 User-speci󹪝c type
9.4.4.1 Introduction
For special applications, a user-speci󹪝c type is available. There is no internal validation check in
the Engineering System. Test the expected functionality for your application.
Parameter assignment
9.4 Assigning parameters using remote operation
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
160 Operating Instructions, 05/2020, A5E41864807-AB