EasyManua.ls Logo

Siemens SITRANS T Series - Connection Type for Input 2 [05]

Siemens SITRANS T Series
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RTD Ni50 GOST 6651-2009 =
0.00617)
N50 G RTD Ni50 – GOST 6651-2009 (α = 0.00617)
RTD Ni100 GOST 6651-2009
= 0.00617)
N100G RTD Ni100 – GOST 6651-2009 (α = 0.00617)
Micro-Volts bipolar µV± Micro-Volts bipolar
Milli-Volts bipolar mV± Milli-Volts bipolar
Volts bipolar Volts bipolar
TC Type B - IEC 584 TC B Thermocouple Type B - IEC 584
TC Type W5 - ASTM E 988 TC W5 Thermocouple Type W5 - ASTM E 988
TC Type W3 - ASTM E 988 TC W3 Thermocouple Type W3 - ASTM E 988
TC Type E - IEC 584 TC E Thermocouple Type E - IEC 584
TC Type J - IEC 584 TC J Thermocouple Type J - IEC 584
TC Type K - IEC 584 TC K Thermocouple Type K - IEC 584
TC Type N - IEC 584 TC N Thermocouple Type N - IEC 584
TC Type R - IEC 584 TC R Thermocouple Type R - IEC 584
TC Type S - IEC 584 TC S Thermocouple Type S - IEC 584
TC Type T - IEC 584 TC T Thermocouple Type T - IEC 584
TC Type L - DIN 43710 TC L Thermocouple Type L - DIN 43710
TC Type U - DIN 43710 TC U Thermocouple Type U - DIN 43710
TC Type Lr - GOST 3044-84 TC LR Thermocouple Type Lr - GOST 3044-84
RTD Cux – GOST 6651-2009 (α =
0.00428)
CUX G RTD Cux – GOST 6651-2009 (α = 0.00428)
1)
RTD Ptx – GOST 6691-2009 (α =
0.00391)
PTX G RTD Ptx – GOST 6691-2009 (α = 0.00391)
1)
Custom Linearization (CUSTOM
SPECIFIC)
CUSTM Custom Linearization (CUSTOM SPECIFIC)
Micro-Volts unipolar (CUSTOM
SPECIFIC)
µV Micro-Volts unipolar (CUSTOM SPECIFIC)
Milli-Volts unipolar (CUSTOM
SPECIFIC)
mV Milli-Volts unipolar (CUSTOM SPECIFIC)
Volts unipolar (CUSTOM SPECIF‐
IC)
V Volts unipolar (CUSTOM SPECIFIC)
None NONE No input type selected
Factory set‐
ting:
None NONE No input type selected
1)
Value x matches customer RTD value
9.3.5 Connection type for input 2 [05]
Selects the connection type for input 2 depending on the selected sensor.
Indication on the dis‐
play
WIRING 2
Setting range: 2, 3, 4-wire
Factory setting: -
Parameter assignment
9.3 Parameter assignment over device with display
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB 145

Table of Contents

Other manuals for Siemens SITRANS T Series

Related product manuals