Procedure
① Mounting holes on the enclosure ④ Fixing screws M8 or 5/16 UNF thread
② Mounting holes in the mounting bracket
(90° rotatable)
⑤ Fixing screws
③ Washer DIN 125 - 8.4
Figure 5-8 Mounting device to the wall with mounting bracket
1. Push the enclosure ① onto the mounting bracket ②.
2. Secure the enclosure ① with the xing screws ④ and washers ③ onto the mounting
bracket.
3. Secure the mounting bracket to the wall.
Use suitable xing screws ⑤.
5.6.3 Rotating the display
To read the local display in any mounting position, you can rotate it incrementally 360°.
Procedure
1. Use a 3 mm Allen key to loosen the front safety catch.
2. Unscrew the front cover.
Installing/mounting
5.6 Mounting the SITRANS TF dual chamber housing
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
72 Operating Instructions, 05/2020, A5E41864807-AB
To Next Page
Loading...
