3. Remove the local display from the holder.
Figure 5-9 Remove the local display
4. Rotate the local display in 90° increments to the desired position.
5. Mount the local display once again at the desired position.
6. Screw the front cover on as far as it will go.
See also
Dual chamber housing design (Page 54)
Opening the device (Page 95)
Installing/mounting
5.6 Mounting the SITRANS TF dual chamber housing
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB 73
To Next Page
Loading...
