Siemens SITRANS T Series - Minimum Measured Peak Value at Input 2 [21]; Maximum Measured Peak Value at Input 2 [22]; Minimum Transmitter Electronics Temperature [23]; Maximum Transmitter Electronics Temperature [24]

9.3.20 Minimum measured peak value at Input 2 [21]
Shows the minimum measured peak value at input 2.
Indication on the dis‐
play
MIN INPUT 2
9.3.21 Maximum measured peak value at Input 2 [22]
Shows the maximum measured peak value at input 2.
Indication on the dis‐
play
MAX INPUT 2
9.3.22 Minimum transmitter electronics temperature [23]
Shows the minimum measured transmitter electronics temperature.
Indication on the dis‐
play
MIN ETEMP
9.3.23 Maximum transmitter electronics temperature [24]
Shows the maximum measured transmitter electronics temperature.
Indication on the dis‐
play
MAX ETEMP
9.3.24 Button lock [25]
Enables the button lock. You can continue to operate the device using remote operation.
Setting range: ON Button lock enabled
OFF Button lock disabled
Factory setting: OFF
Parameter assignment
9.3 Parameter assignment over device with display
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB 157