Siemens SITRANS T Series - Connecting the SITRANS TF Single Chamber Housing; Opening the Device; Connecting the SITRANS TF320 Single Chamber Housing

6.7 Connecting the SITRANS TF single chamber housing
6.7.1 Opening the device
Procedure


① Cover of the electrical cable compartment
② Safety catch
Figure 6-2 Opening device with single chamber housing
1. Use a 3 mm Allen key to loosen the safety catch ②.
2. Unscrew the cover of the electrical cable compartment ①.
6.7.2 Connecting the SITRANS TF320 single chamber housing
Condition
The device is opened. (Page 88)
If you use stranded wire used, you need a ferrule.
Note the maximum permissible core cross-section (Page 196).
Connecting
6.7 Connecting the SITRANS TF single chamber housing
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
88 Operating Instructions, 05/2020, A5E41864807-AB