COMMANDS
Code Command explanation Comment
26
Display tare weight
Activate output / display of the tare value for
5 seconds.
27
End dynamic zero setting/adjustment
Dynamic zero setting is ended and the new zero
value is accepted.
28
Abort dynamic zero setting/adjustment
Dynamic zero setting is aborted and the new zero
value is not accepted.
Log commands
31
Output log text 1
Log output with text layout 1.
32
Output log text 2
Output the log with text layout 2
33
Output log text 3
Output the log with text layout 3
34
Output log text 4
Output the log with text layout 4
35
Repeat last logging procedure
The last log output is repeated.
40-41
Reserved
40
Reserved
41
Reserved
Micro Memory Commands
70
Start the Recording
The recording (trace function) should start
71
End running recording
The activated recording (trace function) is ended.
SIWAREX FTC
6-91
To Next Page
Loading...
