TC35i AT Command Set
7.25 AT+CSNS
s
m
obil
e
TC35i_ATC_V02.07 Page 179 of 439 1/30/04
Confidential / Released
Notes
• The command must be set before the call comes. By default, when you do not modify the settings, all calls
received without bearer element are assumed to be voice.
• The setting will be automatically saved when you power down the GSM engine with
AT^SMSO, provided that
PIN authentication has been done. This value will be restored when PIN authentication is done again.
To Next Page
Loading...
Need help?
General
