TC35i AT Command Set
10.28 AT+FVRFC
s
m
obil
e
TC35i_ATC_V02.07 Page 273 of 439 1/30/04
Confidential / Released
10.28 AT+FVRFC Vertical resolution format conversion
Syntax
Command Description
This command determines the DCE response to a mismatch between the vertical resolution negotiated for the
facsimile session and the Phase C data desired by the DTE.
Parameter Description
0 Disable mismatch checking.
[2] Enable mismatch checking, with resolution conversion of 1-D data in the DCE,
and an implied
AT+FK command executed on 2-D mismatch detection.
Note
• Used for Fax Class 2 only
Test Command
AT+FVRFC=?
Response(s)
(list of supported <vrfc>s)
OK
Read Command
AT+FVRFC?
Response(s)
<vrfc>
OK
Write Command
AT+FVRFC=<vrfc>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
EIA PN-2388
<vrfc>
(num)
To Next Page
Loading...
