Siemens TC35i Terminal User Manual

TC35i AT Command Set
11.10 AT+CNMA
s
m obil e
TC35i_ATC_V02.07 Page 291 of 439 1/30/04
Confidential / Released
11.10 AT+CNMA New SMS message acknowledge to ME/TE, only
phase 2+
Syntax
Command Description
The write / execute command confirms successful receipt of a new message (SMS-DELIVER or SMS-STATUS-
REPORT) routed directly to the TE. TA shall not send another +CMT or +CDS result code to TE until previous
one is acknowledged. If ME does not receive acknowledgment within required time (network time-out), ME sends
RP-ERROR to the network. TA shall automatically disable routing to TE by setting both
<mt> and <ds> values
of
AT+CNMI to zero.
Parameter Description
0 Parameter is only required for PDU mode. Command operates similarly as in
text mode
Test Command
AT+CNMA=?
Response(s)
+CNMA: (list of supported <n>s)
OK
Exec Command
AT+CNMA
Response(s)
OK
ERROR
+CMS ERROR
Write Command
AT+CNMA=<n>
Response(s)
OK
ERROR
+CMS ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.05
<n>
(num)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English