TC35i AT Command Set
10.8 AT+FCR
s
m
obil
e
TC35i_ATC_V02.07 Page 253 of 439 1/30/04
Confidential / Released
10.8 AT+FCR Capability to receive
Syntax
Parameter Description
[0] ME will not receive message data. This can be used when the application has
insufficient storage. The ME can send and can be polled for a file.
1 ME can receive message data.
Note
• Used for Fax Class 2 only
Write Command
AT+FCR=<cr>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
EIA PN-2388
<cr>
(num)
To Next Page
Loading...
